Why additives matter in the environmental fate of biodegradable plastics

Text Konstantin Malafeev, Photo Tampere University

Biodegradable polymers are increasingly used in products such as packaging and agricultural films. Like other plastics, they must remain functional during processing, storage and use. Exposure to heat, sunlight and moisture can change their properties and shorten their useful lifetime.

To help materials withstand these conditions, manufacturers use additives such as antioxidants and UV stabilizers. These ingredients can provide essential protection, but they also raise an important question: how can we make a material stable during use while preserving its ability to biodegrade afterwards?

This apparent paradox is a central challenge in designing biodegradable plastics. Addressing it requires us to look beyond the polymer itself and consider the complete formulation, how it changes during use and the environment in which it is expected to biodegrade.

Biodegradability depends on the environment

“Biodegradable” does not mean that a plastic will disappear quickly wherever it ends up. Under suitable aerobic conditions, microorganisms can convert biodegradable polymers into carbon dioxide, water and biomass. Whether this happens, and how quickly, depends on both the material and its surroundings.

Temperature, moisture, oxygen availability and microbial activity all matter. A material that biodegrades under industrial composting conditions may behave very differently in soil or lake water. This distinction is particularly relevant in northern environments, where low temperatures and seasonal changes can limit degradation.

“Polymer chains may become shorter, crystallinity may change, and cracks may develop.”

Before complete biodegradation, material may undergo several other transformations. Sunlight can trigger photochemical reactions, while water can break susceptible chemical bonds through hydrolysis. Polymer chains may become shorter, crystallinity may change, and cracks may develop.

These changes can promote fragmentation into smaller pieces, including microplastics. Fragmentation, however, is not evidence of complete biodegradation. The resulting particles may undergo further biodegradation if conditions allow, but their lifetime and environmental interactions still need to be understood.

Why additives are part of the question

Discussions of biodegradable plastics often focus on polymers such as polylactic acid (PLA), polybutylene succinate (PBS) and polybutylene adipate terephthalate (PBAT). Commercial products, however, commonly contain additives that make them suitable for processing and use.

Plasticizers improve flexibility, antioxidants help protect polymers during processing, and UV stabilizers reduce damage caused by sunlight. Other ingredients modify color, mechanical properties or interactions with water.

These substances have practical functions. An agricultural mulch film that becomes brittle before the end of the growing season may fail to control weeds or conserve soil moisture. Stabilization can therefore be essential even when biodegradability is a desired property.

“The question is how that protection affects the material after use.”

The question is how that protection affects the material after use. A stabilizer that slows sunlight-induced damage may alter the condition in which the polymer enters the soil. Other additives can influence water uptake, chain mobility, crystallization and surface properties, with consequences that depend on formulation and environment.

Additives also have their own environmental fate. They may remain within the polymer, migrate into surrounding media or undergo chemical transformation. A biodegradable polymer backbone alone therefore does not establish how every component of the product will behave.

The material carries its history

Two products made from the same polymer can enter the environment in different states. One may retain an intact surface and relatively long polymer chains. Another may already contain cracks, shorter chains and a different crystalline structure after exposure to sunlight, heat and moisture.

Their additive content may also have changed. Migration or transformation can reduce protection during use, while changes in the polymer can affect the release of remaining additives.

This creates a dynamic relationship between formulation and ageing. The initial recipe matters, but so does what happen to that recipe over time. Studying only unaged polymers can miss these changes.

An important research task is therefore to connect formulation, service-life ageing and subsequent environmental behavior. This means examining both the particles that form and the chemicals that may be released.

Following these changes at Tampere University

At Tampere University, the BIO-CLEAR project investigates how commercially used additives influence the formation, ageing and properties of biodegradable microplastics.

Our work focuses on PLA formulations with and without UV stabilizers. By comparing these materials, we aim to understand how UV stabilization affects the polymer’s response to UV radiation, humidity and temperature.

We examine changes in polymer structure, thermal properties and particle morphology, alongside the fate of UV stabilizers during ageing. In the next stage, we will use soil-based tests to investigate how aged materials interact with the soil environment.

“Connecting these processes requires expertise across disciplines.”

The broader aim is to connect formulation and ageing with the subsequent behavior of PLA in soil. This approach can help us understand how additives used to protect a material during its useful lifetime influence its environmental fate afterwards.

Connecting these processes requires expertise across disciplines: polymer science to understand changes in the material, analytical chemistry to follow additives and transformation products, and biological research to examine responses to exposure.

For biodegradable plastics, the ultimate goal is to design formulations that remain functional when they are needed but biodegrade predictably under their intended end-of-life conditions.

Konstantin Malafeev

Konstantin Malafeev is a Postdoctoral Research Fellow at Tampere University and the Tampere Institute for Advanced Study (IAS). He holds BSc and MSc degrees in technical physics and a PhD in engineering from Peter the Great St. Petersburg Polytechnic University. Following postdoctoral research at the University of Salerno in Italy, he joined Tampere University, where he leads the BIO-CLEAR project. His research focuses on how additives and environmental ageing influence the degradation of biodegradable polymers and the formation and environmental behavior of microplastics.

Konstantin Malafeev

Kirjaudu sisään

* pakollinen kenttä